|
| Model |
8330
|
| Test Parameter | |Z|,|Y|,C,L,X,R,B,G,D,Q,θ,DCR,Turn-Ratio,Phase |
| Test Frequency | Range: 20 Hz ~300 kHz；Resolution: 10mHz；Accuracy: 0.01% |
| Test Level | Range: 5 mVrms~2 Vrms, Resolution:1mV； 50 µArms ~20 mArms, Resolution:10µA； Accuracy: 5% |
| Output Impedance | 30Ω,100Ω |
| Basic Accuracy | 0.05% |
| Display Range | |
| |Z|,R,X |
0.00001Ω~99.9999MΩ
|
| DCR | 1mΩ~99.9999Ω |
| |Y|,G,B | 0.00001μS~99.9999S |
| C | 0.00001pF~9.99999F |
| L | 0.00001μH~9999.99H |
| D | 0.00001~9.99999 |
| Q | 0.00001~99999.9 |
| Θ |
Degree:
-179.999ş to 179.999ş Radian: -3.14159 to 3.14159 |
| Turns-Ratio | 0.001 to 99.9999M |
| Δ% | -999.999%~999.999% |
| Measurement Speed | Fast:32ms, Medium:90ms, Slow:650ms |
| Equivalent Circuit Mode | Series, Parallel |
| Ranging Mode | Auto / Manual (Hold) |
| Trigger | Internal, Manual, External, Bus(HP-IB or RS232C) |
| Averaging Rate | 1 ~ 255, programmable |
| Correction Function | OPEN, SHORT and LOAD selectable |
| Internal DC Bias Source | 0 V, 1.5 V, 2 V；Accuracy: 1% |
| Comparator | The built-in comparator can sort devices into a maximum of ten bins (BIN 1 to BIN 9 and the OUT OF BINS bin) using a maximum of nine pairs of primary limits and one pair of secondary parameter limits. |
| General | |
| Input Power | 115V / 230Vac±10%, 50Hz / 60Hz, Fuse 4A / 2A |
| Memory | 20 Memories |
| Display | 320 X 240 Graphic LCD |
| Interface | Standard RS232 and USB interface, Optional GPIB (IEEE488),HANDLER and SCANNER interface |
| Environment | 0~40℃, ≤90%RH |
| Dimension | 430 X 186 X 490 |
| Net Weight | 15Kg |
| Standard Accessories | |
| Power Cord | x1 |
| 1801 4 terminals test fixture | x1 |
| 1802 4 terminal Kelvin test clip leads | x1 |
| 1803 2 terminal test clip leads | x1 |
| 1804 Glided shorting plate | x1 |